ASCOM 21 Instrukcja Użytkownika Pobierz pdf (Strona 46)

TD 92477GB

2009-03-18/ Ver. B

User Manual

Ascom d62 DECT Handset

8 Alarm Operation

Note: The following system dependent features are applicable for d62 Protector only, see

Configuration Manual, Ascom d62 DECT Handset, TD 92639GB.

8.1 Push-button Alarm

Press the red alarm button twice within two seconds to activate the alarm. An information

text is displayed, default “Personal Alarm” is displayed. The alarm is sent to the alarm

central that distributes it further. After that the handset returns to stand-by mode. Note

that you can always trigger the alarm when you are speaking, editing your settings, or

while the handset is locked.

8.2 Acoustic Location Signal

An alarm can be followed by an Acoustic Location Signal (ALS). The ALS is a signal from

the handset that sounds for a predefined period of time. The signal is silenced by pressing

the Mute button on the handset.

8.3 Test Alarm

Press and hold the red alarm button until the information text is displayed, default “Test

Alarm” is displayed.

8.4 Alarm with Data

Additional data for example a location code, can be sent along with an alarm. The data

must manually be defined and stored by the user. To use the function, one Soft/Hot key in

the handset must be defined as a shortcut to the menu “Edit alarm data”, see 9.3.1

Define Soft Keys on page 46 or 9.3.2 Define Hot Keys on page 46. The "Edit alarm data"

menu must be activated before creating a shortcut to the menu, see 9.4.1 Add Services

on page 47. The stored data is added to all types of alarm at transmission.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 77 78

Brak uwag

ASCOM 21 Instrukcja Użytkownika Strona 46